PROATM-155

ATM Network Interface Cards for Fiber Optic
and UTP 155 Mbps Connections

Refer to PROATM-V155 for 3.3V PCI bus cards

PROATM-155
  • Main Features

  • Overview

  • Technical Spec.

  • Technical Support

  • Single Mode and Multimode Fiber Optic Models
  • Model for cat5 UTP cable
  • Drivers for Windows, Linux and FreeBSD
  • Software Application Sample
  • Free Technical Support
  • 4096 connections
  • Free technical support
  • 3-year warranty

The PROATM-155 PCI ATM adapters are intended for servers, routers and test benches that connect to fiber optic or UTP ATM networks (STS/STM-1/OC3). They can work in PCI 5V bus. For 3.3V PCI bus, see PROATM-V155.

Examples of use

Connection of workstations and servers; implementation of ATM/Ethernet cost-effective border routers; PPPoA and PPPoE DSLAM connections; traffic generation for AAL0, AAL2 and AAL5 test bench; monitoring; transmission of video and/or sound into several independant channels.

Model

Media

Connector

Max length

Connections

PCI

PROATM-155F

Multimode Fiber

SC duplex

2 Km

4096

5V

PROATM-155FM

Singlemode Fiber

SC duplex

15 Km

4096

5V

PROATM-155FLH

Singlemode Fiber

SC duplex

40 Km

4096

5V

PROATM-155UTP

UTP cat5

RJ45

100 m

4096

5V

Operating System Compatibility

On Windows 2000/XP: The NDIS 5.0 driver gives access to the Microsoft ATM software layers. It supports the UBR, CBR, VBR and ABR QoS and is compatible with Winsock2.

On Linux: A rich set of functions is available on this operating system. Download the linux-atm package from ATM on Linux or linux-atm-2.4.1. The nicstar2.tgz driver runs on Linux kernels 2.4.xx and 2.6.xx. It supports the UBR, CBR, VBR and ABR QoS and manages the OAM cells automatically. It is provided as open source software.

On FreeBSD: The proatm.tar.gz driver runs on FreeBSD 3.5, 3.51, 4.1 and newer. With 5.xx kernels and newer, use the new PATM driver. The card and the driver comply with the HARP ATM software and support the UBR, CBR and VBR QoS.

 

 

 

  • SAR: IDT 77252
  • Theoretical Network Data Transfer Rate (OC3): 155.52 Mbps Full Duplex
  • Practical Data Transfer Rate : 135 Mbps
  • Simultaneous connections: 4096
  • VPI/VCI: 12-bit encoding
  • ATM Standard Compliance:
    • AAL5, AAL0
    • CBR, VBR, UBR, ABR (SAR)
    • UNI 3.0, UNI 3.1 (ILMI included)
    • LAN Emulation (LANE) v1.0
    • Classical IP (CIP - RFC 1577)
  • PROATM-155F Fiber ATM port:
    • Cable: multimode fiber, max 2 km.
    • Connector: SC
    • SONET/SDH, STS/STM-1/OC3
    • Wavelength: 1300 nm
    • Sensitivity: -30 dBm
    • Output Power: -20 dBm
  • PROATM-155FM Fiber ATM port:
    • Cable: single mode fiber, max 15 km.
    • Connector: SC
    • SONET/SDH, STS/STM-1/OC3
    • Wavelength: 1300 nm
    • Sensitivity: -29 dBm
    • Output Power: -15 dBm
  • PROATM-155FLH Fiber ATM port:
    • Cable: single mode fiber, max 40 km.
    • Connector: SC
    • SONET/SDH, STS/STM-1/OC3
    • Wavelength: 1300 nm
    • Sensitivity: -35 dBm
    • Output Power: -5 to 0 dBm
  • PROATM-155UTP UTP ATM Port:
    • Cable: UTP Cat5, max 100m
    • Connector: RJ45
    • STS-3c/STM-1
    • Emission: 1 Vpp
    • Isolation: 1500 Vrms
  • On board memory: 512 KB
  • Indicators:
    • Network Activity
    • Driver is running
  • PCI Bus: 5V, 32-bit, version 2.1
  • PC Data Transfer: Direct Memory Access (DMA)
  • Operating Voltage and Current: 5V, 1 A max
  • Operating Temperature: 0° C to 50° C (32° to 131° F)
  • Operating Humidity: 10% to 90%, non condensing
  • MTBF: 700 000H
  • Size: 120 mm x 75 mm
  • Compliance: FCC Part-15 classe B
  • CE Marking
    • Safety: EN50082-1
    • Emissions: EN 55022 Class A
  • RoHS: NO

 

pdf User Manual

pdf Data Sheet

Last Drivers

In case of problem contact:

email: support@prosum.fr

telephone: (33) 1 4590 6270